Volvo Trim Hoses Volvo Penta

Volvo Trim Hoses Volvo Penta | Marine Spare Parts

Products in Volvo Trim Hoses Volvo Penta

There are 18 products.

Showing 1-18 of 18 item(s)
LATIGUILLO VOLVO 3853857
€90.10

VOLVO HOSE 3853857

Channels the coolant to the port cylinder in Volvo Penta series DP-S, TSK SX-M, SX-C and SX-R propulsion units. Flexible hose for the fresh water cooling circuit, connection between manifold and cylinder in ascending direction.
LATIGUILLO VOLVO 3857523
€62.76

VOLVO HOSE 3857523

For Volvo Penta TSK series engines: SX-M, SX-MACLT, SX-MBAC, SX-MDA, SX-MDB, SX-MDC, SX-MHP and SX-MLT. Flexible hose of the cooling circuit that connects the water collector with the port cylinder downpipe.
LATIGUILLO VOLVO 3853854
€101.74

VOLVO HOSE 3853854

Channels cooling water from the manifold to the starboard cylinder on Volvo Penta DP-S, SX-C, SX-CT and TSK SX-R engines. Cooling circuit hose, valid for DP, SX and TSK series with marine diesel propulsion.
LATIGUILLO VOLVO 3853856
€101.74

VOLVO HOSE 3853856

Manifold duct to port cylinder for Volvo Penta SX-C, SX-CT, DP-S and TSK SX series tailpipes. Cooling circuit hose that distributes cooling water between the collector and the port block. Excludes SXM, MAC, MDA, MDB and MLT variants.
LATIGUILLO VOLVO 3857524
€72.25

VOLVO HOSE 3857524

For Volvo Penta TSK series engines: SX-M, SX-MACLT, SX-MBAC, SX-MDA, SX-MDB, SX-MDC, SX-MHP and SX-MLT. This hose connects the water collector to the starboard cylinder, maintaining the circulation of cooling water on the right side of the engine block.
LATIGUILLO MOTOR TRIM
€139.85

VOLVO TRIM HOSE 852839

It conducts the hydraulic fluid in the trim system of Volvo Penta AQ131, AQ225, TAMD41, AD41, TMD40 and DP/SP series engines, among others. The hose connects the pump to the actuating cylinders for adjusting the pitch of the propeller during navigation.
LATIGUILLO TRIM  DPS Y DPX
€139.85

VOLVO TRIM HOSE 873229

Connects the trim pump to the actuator cylinder on Volvo Penta TAMD31, TAMD41, AD31, AD41, TMD31, KAD42 engines and DP-C, DP-D, DP-E units, among others. The high-pressure hydraulic hose allows the activation of the trim system to adjust the seat of the hull while sailing.
KIT LATIGUILLOS VOLVO SX-A TSK 21481309
€498.16

ORIGINAL VOLVO BRAKE HOSE KIT 21481309

Compatible with Volvo Penta petrol and diesel engines: D3-130, D3-200, 4.3GXI, 5.0GXI, 5.7GXI, 8.1GXI, V6-280, V8-350, TSK and SX-A series, among others. Original factory replacement hydraulic connection hose kit for cooling and fuel supply circuits. Includes variants for SX-A, TSK-A, TSK-B and...
KIT LATIGUILLOS CILINDROS TRIM
€236.14

ORIGINAL VOLVO TRIM HOSE KIT 857624

Connects the transom with the trim system piston in Volvo Penta AQ225D, AQ290A, TAMD41A, AD41, DP-A and SP-A engines, among others. Kit of 2 original hoses for the hydraulic tilt and trim circuit of the stern unit. Volvo Penta, compatible with more than 60 models of the AQ, TAMD, TMD, AD, DP and...
LATIGUILLO TRIM  DPS Y DPX
€139.85

VOLVO TRIM HOSE 873228

Connects the piston pump with the trim system on Volvo Penta TAMD31, TAMD41, AD31, AD41, TMD41 and DP, TSK series engines. The hose carries the hydraulic fluid under pressure to tilt the drive unit. Its replacement is necessary if there are signs of leaks or loss of pressure in the trim circuit.
TUBO HIDRAULICO VOLVO
€169.80

VOLVO TRIM HOSE 21721548 3809559

Trim circuit hydraulic hose for Volvo Penta D4-225, D4-300, D6-310, D6-370 and D6-400 engines, with DPH-A, DPH-C, DPR and TSK DPH tail groups. It connects the trim cylinder with the pump to transmit the working pressure in the propeller tilt and yaw system.
TUBO HIDRAULICO VOLVO
€169.80

VOLVO TRIM HOSE 21721550

Connects the trim cylinder to the hydraulic pump on Volvo Penta D4-225, D4-300, D6-310, D6-370 and DPH, DPR and TSK series engines. The hose transmits the pressure of the hydraulic circuit to regulate inclination and angle of the tail in recreational and professional boats.
TUBO TRIM VOLVO 852830
  • Non disponibile
€125.01

VOLVO 852830 TRIM TUBE

Channels the hydraulic fluid of the trim and tilt system in Volvo Penta AQ131B, AQ225D, AQ290A, TAMD41A, AD41, DP-A and SP-A engines, among others. The tube directs the hydraulic pressure necessary to adjust the angle of the propeller during navigation, preventing leaks that affect maneuverability.
TUBO TRIM VOLVO 852832
  • Non disponibile
€125.01

TUBE TRIM VOLVO 852832

Conducts the hydraulic fluid of the trim system in Volvo Penta AQ225D, AQ260A, TAMD41A, AD41, TMD41A and DP series engines. The tube regulates the activation pressure of the tilt mechanism of the propulsion unit, allowing the thrust angle to be adjusted according to navigation conditions.
TUBO HIDRAULICO VOLVO
€252.02

VOLVO HOSE 3809559 21721548 RM3809559

Connects the trim cylinder with the hydraulic pump on Volvo Penta D4-225, D4-300, D6-310, D6-370 engines and DPH-A, DPH-E, DPR and TSK propellers. The hose conducts the hydraulic pressure that regulates the inclination angle of the drive unit in IPS and diesel inboard-outboard systems.
KIT LATIGUILLOS TRIM VOLVO 21945911
€924.44

VOLVO TRIM HOSE KIT 21945911

Hydraulic trim circuit for Volvo Penta 4.3GXI, 5.0GXI, 5.7GXI, 8.1GI and D3 diesel engines, as well as V6 and V8 series. The hoses connect the control unit with the trim actuating cylinders, allowing the inclination of the drive unit to be regulated with precision.