Bimini Tops and Accessories

Bimini tops for boats: shade, protection and quick fitting

A bimini top is the most practical way to shade a boat's cockpit without giving up the ability to keep going. It folds back towards the stern in seconds, needs no structural work, and protects the crew as well as the upholstery and onboard electronics from sun and light rain.

At Repuestos Marinos we stock 2, 3 and 4-bow bimini tops from Oceansouth and Tessilmare, along with all their accessories: bases, fittings, tensioners, storage boots and securing straps. Frames in anodised aluminium or AISI 316 stainless steel, and canopies in 600D polyester or solution-dyed acrylic with UV treatment.

Bimini top and accessory range

• Bimini Tops (6)
• Bimini Tops with Mounts (2)
• Economy Bimini Tops (10)
• Bimini Cruiser Tops (2)
• Bimini Whitewater Pro (2)

How to measure up and choose your bimini top

Width. Measure the distance between the two mounting points on the gunwale, at the height where you intend to fix the bases. This is the critical dimension: too narrow and the top will not open, too wide and it sits slack and flaps.

Length. This is the shade it casts fore and aft once deployed. Two-bow biminis cover around 1.4 m, three-bow ones between 1.8 and 2 m, and four-bow ones up to 2.4 m.

Height. The distance from the base to the highest point of the bow. Choose a height that lets you stand up in the cockpit without compromising visibility from the helm or clearance under bridges.

Number of bows. Two bows for inflatables, RIBs and small boats; three bows is the best-balanced option for most 5 to 8 m boats; four bows for larger boats where maximum shaded area is the priority.

Fitting and care

Fitting requires no special tools: bolt the bases to the gunwale or the topsides, assemble the bows and tension the fore and aft straps. Leave the straps lightly tensioned, never bar-taut, so the assembly can absorb shock loads without punishing the mounting points.

Always stow the bimini before running at high speed or in strong wind. That is the number one cause of broken bows and bases pulled out. Clean the canopy with fresh water and mild soap, never with bleach or solvents, and store it completely dry to prevent mildew. Every season, check that the base bolts are tight and that the fittings are in good order.

Warranty and 24-48 h delivery

All our bimini tops come with a storage boot and a set of straps. The canopies are UV-treated and stitched with polyester thread that resists solar degradation. We also carry individual spares: canopies, bows, bases, fittings and tensioners.

Delivery in 24-48 h to mainland Spain and the Balearics, 3-5 days to the Canary Islands and the rest of the EU. Orders placed before 14:00 ship the same day. Returns within 14 calendar days, plus technical advice by phone and WhatsApp for questions about fitment or parts diagrams.

Frequently asked questions about bimini tops

How do I measure my boat to choose the right bimini top?

The critical dimension is the width: the distance between the two points where you will fix the bases on the gunwale. Then check the length (the shade it casts fore and aft) and the height from the base to the highest bow. If the width is too small the top will not open; too large and it sits slack and flaps.

How many bows do I need, 2, 3 or 4?

Two bows for inflatables, RIBs and small boats, giving around 1.4 m of shade. Three bows is the best-balanced option for boats of 5 to 8 metres, with 1.8 to 2 m of shade. Four bows for larger boats where maximum covered area is the priority, up to 2.4 m.

Can I motor along with the bimini top up?

Only at moderate speed and in light wind. Always stow the bimini before running fast or in strong wind: it is the most common cause of broken bows and bases pulled out. A bimini is designed to give shade at anchor or on a gentle passage.

Will a bimini top work on an inflatable or a RIB?

Yes, there are specific 2 and 3-bow models with bases designed for tubes. On inflatables it is better to mount them with a tube clamp rather than bolting through, and to choose a lightweight model that does not overload the tubes.

How do I clean the bimini canopy?

With fresh water and mild soap, a soft brush and a thorough rinse. Never use bleach, solvents or aggressive cleaners, as they degrade the UV treatment and the stitching. Always store it completely dry inside its boot to prevent mildew and staining.

Do you sell individual bimini spares?

Yes. We stock replacement canopies, bows, bases, fittings, tensioners, straps and boots separately, so you do not have to replace the whole top when only one part has been damaged.