FUEL LINE 2M 8mm

Function and technical context

This fuel line with an internal diameter of 8 mm and a length of 2 meters is part of the supply circuit in marine engines, channeling the fuel from the tank to the carburetor or injection system. It works integrated into the fuel system, supporting continuous cycles of pressure, vibrations and constant exposure to marine fuels, which requires a material that is especially resistant to chemical degradation. Its integrity is critical to guarantee a constant and leak-free fuel supply: any crack or deterioration can cause loss of power, unexpected engine stops or, in serious cases, risk of fire on board. The 2 meter length provides sufficient margin for installations with flexible routing between the tank and the propellant, facilitating the laying of the tube without tension or forced bends.

When to replace this part?

The most common symptoms of deterioration in a marine fuel line are hardening or cracking of the tube, surface discoloration, a persistent smell of petrol in the bilge or deck, difficulty in cold starting and loss of speed during navigation due to fuel flow restriction. It is recommended to visually inspect the tube during each seasonal maintenance and to proceed with its preventive replacement every two seasons, regardless of the apparent condition, since the rubber degrades with thermal cycles and prolonged contact with fuel additives. Replacing the pipe before leaks appear prevents serious breakdowns at sea and ensures safe navigation.

Compatibility